NAIL MAKING MACHINE
Model:YT-1 , YT-2 , YT-3 , YT-4 ,YT- 8
The machine is fed with from the wire stand through 2 sets of rollers, vertical and horizontal, which straighten the wire, and another set of rollers which pushes it into the right position for the head to be formed.The grip dies then close and hold the wire very tightly while the punch, attached to a punch box driven back and forth by connecting rods from the crank shaft, hits the wire end to form a nail head.The punch then moves backward, the grip dies open, the wire moves forward to a desired length, and two opposing cutters cut off and point the nail. The finished nail is ejected through the chute to a container on the ground. The cycle is continuous.
Description :
Model Size of Nail R.P.M. Limit Motor HP Output 8hr/set (kgs)
YT-1 BWG # 17X3/4"(19mm)
BWG # 16X1"(25mm)
550 1 60
100
YT-2 BWG # 15X 1 1/4"(32mm)
BWG # 14X1 1/2"(30mm)
BWG # 13X1 3/4"(45mm)
450 2 150
210
340
YT-3 BWG # 12X2"(50mm)
BWG # 11X2 1/2"(55mm)
BWG # 10X3"(75mm)
350 3 990
530
810
YT-4 BWG # 9X 3 1/2"(90mm)
BWG # 8X4"(100mm)
270 5 900
1270
YT-8 BWG # 7X5"(127mm)
BWG # 6X6"(152mm)
BWG # 5X7"(178mm)
180 7 1/2 1080
1800
2240